Hardware element down-gigamon-GigaVUE-OS

Hardware element down-gigamon-GigaVUE-OS

Vendor: gigamon


Alert if any hardware elements are not operating correctly.

Remediation Steps:
Troubleshoot the hardware element as soon as possible.

How does this work?
Using the “show cards” command and parsing the output

Why is this important?
Card failures can only be detected via CLI

Without Indeni how would you find this?
Login to the device’s CLI, change to enable mode and issue “show cards”. This will present a table with cards and their statuses.


name: gigamon-show-cards
description: Show cards
type: monitoring
monitoring_interval: 5 minutes
    vendor: gigamon
    os.name: GigaVUE-OS
    privileged-mode: 'true'
        why: |
            Card failures can only be detected via CLI
        how: |
            Using the "show cards" command and parsing the output
        without-indeni: |
            Login to the device's CLI, change to enable mode and issue "show cards". This will present a table with cards and their statuses.
        can-with-snmp: false
        can-with-syslog: false
-   run:
        type: SSH
        command: show cards
        type: AWK
        file: gigamon-show-cards.parser.1.awk


// Deprecation warning : Scala template-based rules are deprecated. Please use YAML format rules instead.

package com.indeni.server.rules.library.templatebased.crossvendor

import com.indeni.server.rules.RuleContext
import com.indeni.server.rules.library.templates.StateDownTemplateRule
import com.indeni.server.rules.RemediationStepCondition

case class cross_vendor_hardware_element_status() extends StateDownTemplateRule(
  ruleName = "cross_vendor_hardware_element_status",
  ruleFriendlyName = "All Devices: Hardware element down",
  ruleDescription = "Alert if any hardware elements are not operating correctly.",
  metricName = "hardware-element-status",
  applicableMetricTag = "name",
  alertItemsHeader = "Hardware Elements Affected",
  alertDescription = "The hardware elements listed below are not operating correctly.",
  baseRemediationText = "Troubleshoot the hardware element as soon as possible.")(
  RemediationStepCondition.VENDOR_CISCO ->
    """|While the port may be in up status, the link quality might be degraded and is not between the threshold levels. Check the following to troubleshoot this issue.
       |1.	Run the “show interface transceiver detailed” NX-OS command to display information about the transceivers connected to a specific interface. Besides, this NX-OS command output provides information about the Cisco SFP Product ID (PID). NOTE: In case that have been used 3rd party SFPs it is possible to get an Indeni alert because the current light signal is different than the recommended min/max thresholds defined by Cisco.
       |2.	Use the “show interface transceiver calibrations” NX-OS command to display calibration information for the transceiver interfaces.
       |3.	Consider to enable DOM (if supported). Digital Optical Monitoring or DOM is an industry wide standard, intended to define a SFP to access real-time operating parameters such as Tx power, Rx power etc. More details can be found below: https://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/DOM_matrix.html
       |4.	Cisco has published official specifications (Rx, Tx power level etc) per transceiver category and can be found at the following link:
  RemediationStepCondition.VENDOR_FORTINET ->
      |1. Login via ssh to the Fortinet firewall and run the FortiOS command "exec sensor list" to review the status of the hardware components and temperature
      |>>> thresholds. When the flag to the command output is set to 0, the component is working correctly and when flag is set to 1, the component has a problem.
      |>>> The FortiOS command "execute sensor detail" will show extra information such as the low/high thresholds. More details can be found here:
      |>>> http://kb.fortinet.com/kb/viewContent.do?externalId=FD36793&sliceId=1
      |2. Consider running the fotrinet hardware diagnostics commands. While they do not detect all hardware malfunctions, tests for the most common hardware
      |>>> problems are performed. More details can be found here:
      |- http://kb.fortinet.com/kb/viewContent.do?externalId=FD39581&sliceId=1
      |- http://kb.fortinet.com/kb/documentLink.do?externalID=FD34745
      |3. It is recommended that any failed fan or power supply unit should be replaced immediately.
      |4. The cooling system for the devices should be installed to avoid overheat.
      |5. If the problem persists, contact Fortinet Technical support at https://support.fortinet.com/ for further assistance.""".stripMargin.replaceAll("\n>>>", "")