Help Identifying switch and driver

Hubitat C3
Inovelli LZW-30??

I need help with a switch. Inovelli on/off. I don’t know if it is red or black, scene or not scene, gen 1 or gen 2.

Without removing the switch, what is the easiest way to determine which switch I have and what firmware am I running?

I had an inovelli on/off switch in the garage and the physical part of the switch died. I could switch the lights on and off digitally but not physically. So I pulled the switch and added it to my junk bin.

I repurposed the switch to control my blinds in the living room, since that would be a digital signal only.

Here is what happens, RANDOMLY, the switch will physically turn off. Well the logs will say that it was turned off physically. The default blind position for off is closed. Therefore, 10AM if the switch “turns off” the blinds close.

Sooo… I wanted to just disable the relay completely, but the LZW-30 driver I was using in Hubitat, that wasn’t an option. I started down the rabbit hole of trying to determine the best driver, found firmware upgrades to the LZW-30-SN… ugh…

So what switch do I have is my step 1. It is definitely an on/off.
Any thoughts would be great.