TX packets experienced collisions-juniper-junos

TX packets experienced collisions-juniper-junos

Vendor: juniper

OS: junos

Description:
Indeni tracks the number of packets that had issues and alerts if the ratio is too high.

Remediation Steps:
Packet collisions usually occur when there is a mismatch in duplex settings on two sides of a cable.

How does this work?
This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the “show interfaces extensive” command. The output includes all the interface related information and statistics.

Why is this important?
Capture the interface Transmitted Packets counter. Knowing the amount of bytes and packets flowing through an interface can help estimate an interface’s performance and utilization.

Without Indeni how would you find this?
There are many solutions out there for tracking traffic flow on network interfaces and alerting when critical indicators are reached.

junos-show-interfaces-extensive

name: junos-show-interfaces-extensive
description: JUNOS get interface information (including stats)
type: monitoring
monitoring_interval: 1 minute
requires:
    vendor: juniper
    os.name: junos
comments:
    network-interface-state:
        why: |
            Capture the interface state. If an interface transitions from up to down an alert would be raised.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            It is possible to poll this data through SNMP. Interface state transitions will generate a syslog event.
        can-with-snmp: true
        can-with-syslog: true
    network-interface-admin-state:
        why: |
            Capture the interface administrative state.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            It is possible to poll this data through SNMP. Interface state transitions will generate a syslog event.
        can-with-snmp: true
        can-with-syslog: true
    network-interface-description:
        skip-documentation: true
    network-interface-speed:
        why: |
            Capture the interface speed in human readable format such as 1G, 10G, etc. indeni will alert if the speed is below 1G.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            It is possible to poll this data through SNMP.
        can-with-snmp: true
        can-with-syslog: false
    network-interface-duplex:
        why: |
            Capture the interface duplex in human readable format such as full or half. In modern network environments it is very uncommon to see half-duplex interfaces, and that should be an indication for a potential exception.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            It is possible to poll this data through SNMP. If a duplex mismatch is detected on a port syslog messages will be generated.
        can-with-snmp: true
        can-with-syslog: true
    network-interface-rx-frame:
        why: |
            Capture the interface Receive Errors (CRC) counter. If this counter increases an alarm will be raised.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            It is possible to poll this data through SNMP and set specific alert thresholds when the counter increases.
        can-with-snmp: true
        can-with-syslog: false
    network-interface-mac:
        why: |
            Capture the interface MAC address.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            It is possible to poll this data through SNMP for inventory purposes.
        can-with-snmp: true
        can-with-syslog: false
    network-interface-type:
        why: |
            Capture the interface type, for example "Ethernet".
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            It is possible to poll this data through SNMP.
        can-with-snmp: true
        can-with-syslog: false
    network-interface-rx-bytes:
        why: |
            Capture the interface Received Bytes counter. Knowing the amount of bytes and packets flowing through an interface can help estimate an interface's performance and utilization.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            There are many solutions out there for tracking traffic flow on network interfaces and alerting when critical indicators are reached.
        can-with-snmp: true
        can-with-syslog: false
    network-interface-rx-dropped:
        why: |
            Capture the interface Received Errors counter. Packet loss may impact traffic performance.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            There are many solutions out there for tracking traffic flow on network interfaces and alerting when critical indicators are reached.
        can-with-snmp: true
        can-with-syslog: false
    network-interface-rx-packets:
        why: |
            Capture the interface Received Packets counter. Knowing the amount of bytes and packets flowing through an interface can help estimate an interface's performance and utilization.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            There are many solutions out there for tracking traffic flow on network interfaces and alerting when critical indicators are reached.
        can-with-snmp: true
        can-with-syslog: false
    network-interface-ipv4-address:
        why: |
            Capture the interface IPv4 address. Only relevant for layer 3 interfaces, including Vlan interfaces (SVI).
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            It is possible to poll this data through SNMP.
        can-with-snmp: true
        can-with-syslog: false
    network-interface-ipv4-subnet:
        why: |
            Capture the interface IPv4 subnet mask. Only relevant for layer 3 interfaces, including Vlan interfaces (SVI).
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            It is possible to poll this data through SNMP.
        can-with-snmp: true
        can-with-syslog: false
    network-interface-tx-carrier:
        why: |
            Capture the interface carrier state change counter. It would increase every time the interface changes state from up to down.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            There are many solutions out there for tracking traffic flow on network interfaces and alerting when critical indicators are reached.
        can-with-snmp: true
        can-with-syslog: false
    network-interface-mtu:
        why: |
            Capture the interface MTU (Maximum Transmit Unit). A low MTU may cause issues.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            It is possible to poll this data through SNMP and alert if the MTU is too low.
        can-with-snmp: true
        can-with-syslog: false
    network-interface-tx-bytes:
        why: |
            Capture the interface Transmitted Bytes counter. Knowing the amount of bytes and packets flowing through an interface can help estimate an interface's performance and utilization.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            There are many solutions out there for tracking traffic flow on network interfaces and alerting when critical indicators are reached.
        can-with-snmp: true
        can-with-syslog: false
    network-interface-tx-errors:
        why: |
            Capture the interface Transmit Errors counter. Transmission errors indicate an issue with duplex/speed matching.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            There are many solutions out there for tracking traffic flow on network interfaces and alerting when critical indicators are reached.
        can-with-snmp: true
        can-with-syslog: false
    network-interface-tx-packets:
        why: |
            Capture the interface Transmitted Packets counter. Knowing the amount of bytes and packets flowing through an interface can help estimate an interface's performance and utilization.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            There are many solutions out there for tracking traffic flow on network interfaces and alerting when critical indicators are reached.
        can-with-snmp: true
        can-with-syslog: false
    network-interface-rx-overruns:
        why: |
            Capture the interface Receive Overrun errors counter.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.
        without-indeni: |
            There are many solutions out there for tracking traffic flow on network interfaces and alerting when critical indicators are reached.
        can-with-snmp: true
        can-with-syslog: false
steps:
-   run:
        type: SSH
        command: show interfaces extensive | display xml
    parse:
        type: XML
        file: show-interfaces-extensive.parser.1.xml.yaml

CrossVendorTxCollisions

// Deprecation warning : Scala template-based rules are deprecated. Please use YAML format rules instead.

package com.indeni.server.rules.library.templatebased.crossvendor

import com.indeni.server.rules.RuleContext
import com.indeni.server.rules.library.templates.NearingCapacityWithItemsTemplateRule
import com.indeni.server.rules.RemediationStepCondition

/**
  *
  */
case class CrossVendorTxCollisions() extends NearingCapacityWithItemsTemplateRule(
  ruleName = "CrossVendorTxCollisions",
  ruleFriendlyName = "All Devices: TX packets experienced collisions",
  ruleDescription = "Indeni tracks the number of packets that had issues and alerts if the ratio is too high.",
  usageMetricName = "network-interface-tx-collisions",
  limitMetricName = "network-interface-tx-packets",
  applicableMetricTag = "name",
  threshold = 0.5,
  minimumValueToAlert = 100.0, // We don't want to alert if the number of packets is really low
  alertDescription = "Some network interfaces and ports are experiencing a high collision rate. Review the ports below.",
  alertItemDescriptionFormat = "%.0f collisions identified out of a total of %.0f transmitted.",
  baseRemediationText = "Packet collisions usually occur when there is a mismatch in duplex settings on two sides of a cable.",
  alertItemsHeader = "Affected Ports")(
  RemediationStepCondition.VENDOR_FORTINET ->
    """
      |1. Run "diag hardware deviceinfo nic <interface>" command to display a list of hardware related error names and values. Review  the next link for more details: http://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-toubleshooting-54/troubleshooting_tools.htm
      |2. Run command "fnsysctl cat /proc/net/dev" to get a summary of the interface statistics.
      |3. Check for speed and duplex mismatch in the interface settings on both sides of a cable, and check for a damaged cable. Review the next link for more info: http://kb.fortinet.com/kb/documentLink.do?externalID=10653""".stripMargin 
)